• EMT Pipe Electrical Conduit Bender
  • EMT Pipe Electrical Conduit Bender
  • EMT Pipe Electrical Conduit Bender
  • EMT Pipe Electrical Conduit Bender

EMT Pipe Electrical Conduit Bender

Automation: Manual
Transport Package: Carton Box
Specification: 20mm/25mm/32mm
Samples:
US$ 10/Piece 1 Piece(Min.Order)
| Order Sample
Customization:
Shipping Cost:

Estimated freight per unit.

about shipping cost and estimated delivery time.
Payment Method: visa mastercard discover JCB diners club american express T/T
  Initial Payment Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
From payment to delivery, we protect your trading.
EMT Pipe Electrical Conduit Bender pictures & photos
EMT Pipe Electrical Conduit Bender
US $10 / Piece
Min. Order: 5 Pieces
Manufacturer/Factory, Trading Company

360° Virtual Tour

Diamond Member Since 2008

Suppliers with verified business licenses

Secured Trading Service
Rating: 5.0/5
Zhejiang, China
Years of Export Experience
The export experience of the supplier is more than 10 years
Experienced Team
The supplier has 60 foreign trading staff(s) and 44 staff(s) with over 6 years of overseas trading experience
Self-branded
The supplier has 2 Self-brands, check the Audit Report for more information
Exhibition Experience
The supplier had participated in offline trade shows, you can check the Audit Report for more information
to see all verified strength labels (17)
  • Overview
  • Product Description
  • Packaging & Shipping
  • Installation Instructions
  • Company Profile
  • FAQ
Overview

Basic Info.

Model NO.
SCB
Trademark
PST
Origin
China
HS Code
8205590000

Product Description

Conduit 1/2′′-4′′ Galvanized Gi Pipe Electrical Conduit Bender
EMT Pipe Electrical Conduit Bender

Product Description

Cat.No Trade Size
mm
SCB-20H 20
SCB-25H 25
SCB-32H 32
EMT Pipe Electrical Conduit Bender

Packaging & Shipping

EMT Pipe Electrical Conduit Bender
EMT Pipe Electrical Conduit Bender
EMT Pipe Electrical Conduit Bender

Installation Instructions

EMT Pipe Electrical Conduit Bender
Select the correct bender.
Make sure your bender is designed for EMT or Rigid conduit of the size you are using. Even a universal bender may require attaching a shoe and/or follow bar designed for the conduit. This article focuses on hand benders. If you are using a hydraulic or power bender (recommended for conduit with a nominal size
over 2 inches), find instructions for your specific bender model.
Hickey benders tend to crush or kink conduit. Use a bender with a curved track for the conduit to slot into.
Measure the desired length of the stub.
A stub up bend is a 90º bend near the end of the conduit. Measure the distance on the wall from the end of the conduit to the position of the bend.
EMT Pipe Electrical Conduit Bender
EMT Pipe Electrical Conduit Bender
Subtract the take-up height.
The radius of the bend will add extra length to the bent end of your conduit. Take this into account by subtracting a certain amount from your measurement: If you are using
½" EMT conduit, subtract 5" (12.7 cm). ¾" conduit: subtract 6" (15.2 cm). 1" conduit: subtract 8" (20.3 cm. 1¼" conduit: subtract 11" (27.9 cm).
Line the arrow mark on your bender to this measurement.
Place your conduit on the floor. Measure from the end of the conduit to the new length you calculated, and mark the conduit at this point. Line the arrow symbol on your bender up so it points to this mark. Slot your bender onto the conduit. Make sure the bender handle is angled toward the end you measured from. If your bender does not have an arrow symbol, you may need to find the instructions for you.
EMT Pipe Electrical Conduit Bender
EMT Pipe Electrical Conduit Bender
Press down on the foot pedal to bend the conduit.
Your foot should provide most if not all of the pressure. Without pulling, use one hand to steady the handle on your bender, and the other to steady the conduit end once it rises within reach. Apply firm, constant foot pressure, as a pause could create a kink in your conduit.[3] Bend until the end of the conduit is vertical, or very slightly past vertical. If your conduit is 1¼" or larger, you may need an assistant to operate the handle.
Confirm the bend with a spirit level (recommended)
Attach a level to the vertical length of conduit. If necessary, make small adjustments to the bend until the bubble of the level is centered. The conduit will flex back slightly after you remove the bender, so bending slightly too far will provide the best results
EMT Pipe Electrical Conduit Bender

 

Company Profile

EMT Pipe Electrical Conduit Bender

FAQ

Q1: Is it can be used for Chile Market?A: Yes,It is according to the new standard IEC61386
Q2: Are you manufacture?A: Yes,we have factory and warehouse in Fuyang Hangzhou city.
Q3: How can I request product samples?A: The samples are free but courier charge will be collected. Please send us samples list and courier account number.
Q4: How can I request a product catalog?  A: The hard copies of catalogs are free but courier charge will be collected. 
     The PDF catalog we can send to you by email or WeTransfer.

Q5: What is your payment terms?A: 30% T/T deposit,balance against B/L faxed copy; 
    Irrevocable L/C 100% at sight and irrevocable.

Q6: How about the delivery time?A:  Accord to your order list and quantity,mostly delivery in 30days.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

From payment to delivery, we protect your trading.
EMT Pipe Electrical Conduit Bender pictures & photos
EMT Pipe Electrical Conduit Bender
US $10 / Piece
Min. Order: 5 Pieces
Diamond Member Since 2008

Suppliers with verified business licenses

Secured Trading Service
Rating: 5.0/5
Manufacturer/Factory, Trading Company
Registered Capital
5000000 RMB
Plant Area
1001~2000 square meters